Applying Labels

Depending on the media type, barcode labels are either stickers that are adhered to the front of the tape cartridge or cutouts that you slide into an indentation on the front of the cartridge. Adhesive labels should be fixed centrally within the cartridge recess provided. When applying adhesive labels, rubber gloves should be worn to prevent moisture from the skin contaminating the adhesive. Optimum temperature over 10 degrees C. Some examples are shown below.


WARNING
Do not use wraparound labels on DLT cartridges. Most labels use a removable adhesive and have a tendency to curl or tear after multiple uses. This can jam the mechanical movement of the drives and the media picker. Place labels only in the space provided on the cartridge

HP LTO TYPE


GENERAL DLT


IBM, ADIC LTO TYPE


STORAGETEK DLT


STORAGETEK LTO


QUALSTAR



Netc Labels
Trusted Barcode Solutions

Netc Labels

IBM
Approved

IBM Approved

Overland Storage
Approved

Overland Storage Approved

StorageTek
Approved

StorageTek Approved